Twitter Worldcast Systems

Facebook Worldcast Systems
GOLDENEAGLE DVB-T/H

Basic and Full MPEG-T Module


MPGEG Function Basic MPEG Module Full MPEG Module
TS Sync Loss
Sync byte error
PAT error  
PMT error
Continuity Count Error
PID Error		 X
X
X
X

 X
X
X
X
X
X
Transport error
CRC error
PCR repetition error
PCR discontinuity error
PCR accuracy error
PTS error
CAT error		 X
X
X
X


X
 X
X
X
X
X
X
X
NIT Actual error
NIT Other error
SI repetition error
Unreferenced PID error
SDT actual error
SDT other error
EIT actual error
EIT other error
EIT PF error
RST error
TDT error		 X
X		 X
X
X
X
X
X
X
X
X
X
X
Service availability
Service degradation
Service Impairments		   X
X
X
MIP Timing Error
IP Structure Error
MIP Presence Error
MIP Pointer Error
MIP Periodicity Error
MIP TS Rate Error
MIP table content display		   X
X
X
X
X
X
X
PCR Jitter   X
Services & components structure
Services & components datarate		   X
X
MPEG2 / H.264* Video streaming X X
* The H.264 stream cannot be compressed, the bandwidth must therefore be sufficient to perform this task.


Expert Module



DVB-H Function Expert Module
PID Table
 PID, table ID, TP, PUSI, TSC, AFC, TPRI, TEI, CC
SI/PSI Table
 		Timestamp, offset, duration,  clear content display
DVB-H Burst
 		PID list, Time line, MPE-FEC
FER/MFER
MPE: Before/after correction
DVB-H error - Burst too late
- Burst too early
- Table boundary missing
- Frame boundary missing
- Table boundary overflow
- Adress error
- Max burst duration overflow
- Padding column error

Basic and Full RF Module


RFFunction Basic RFModule Full RF Module
RF level
  X  X
BER
  X  X
MER
  X  X
PER
  X  X
Carrier/Noise
  X  X
Transmission  parameters
  X  X
DVB-T presence (AGC, TPS…)
    X
TS sync lost + sync byte error
  X  X
Constellation diagram
    X
Impulse response (SFN)    X


TECHNICAL SPECIFICATIONS



Hardware description
External dimensions (L x H x D) 483 mm (19’’) x 88.5 (2U) x 345 mm (13 ½“)
Weight
 Around 6 kg (13 ¼ lbs)
Main power supply
 100-250 VAC – 50-60 Hz
Power consumption
 +/- 60 W @ 230 VAC
Temperature
  • Optimal performance
  • Guaranteed working
  • Storage
  • +5°C - +45°C
  • 0°C - +50°C
  • -20°C - +70°C
Humidity 10-95% non-condensing relative humidity
Interfaces
RF input
(RF or RF-ASI version with no additional inputs)
 1 - BNC type
ASI input
(ASI or RF-ASI version with no additional inputs)
 1 - BNC type
LAN ports
1 - 10/100M Base-T RJ45 ports
USB ports
 2 - A type
Serial port
 1 - RS232, configurable for console mode or serial communication
Power button 1
LED indicators 3 - RUN, HDD, Power
Metering (analog inputs) Up to 8 (option)
Status (digital inputs) Up to 80 (option)
Commands (relay outputs)
 Up to 40 (option)
I/O specifications
Metering (analog inputs)
 12-bit -0 V/+50 V (4 ranges)
Status (digital inputs)
 5-25 VDC external or contact closure
Commands (relay outputs) 1 A @ 50 VDC per relay
  RF characteristics
RF Input impedance 75 Ω
UHF Frequency Band
 		470 to 860 MHz
VHF Frequency Band
 		170 to 234 MHz
Frequency step
 		166,6 kHz
Channel bandwidth
 		5, 6, 7 and 8 MHz
FFT Modes
 		2k, 4k, 8k
DVB-T/H Signals supported
 		QPSK, 16-QAM, 64-QAM
Guard Int. 1/32, 1/16, 1/8, 1/4
Code Rate 1/2, 2/3, 3/4, 5/6, 7/8
Sensibility range (given for QEF criteria):
  • Min Value for QPSK 1/2 8K
  • Min Value for 64QAM 2/3 8K
 20 to -95 dBm
  • 95 dBm
  • 75 dBm
Positive and negative offset
 		0 or +/- 166 kHz
Adjacent digital channel rejection Between 20 dB and 30 dB
 Monitoring performance 
MER* in normal operation (for RF input -40 dBm)
  • For 64 QAM 2/3 8k
  • For 16 QAM 7/8 8k
 0 to 28 dB (resolution of 1 dB)

  • 28 dB
  • 27 dB
C/N in normal operation
0 to 28 dB (resolution of 1 dB)
BER Accuracy
 		10-8 (before RS and after Viterbi)
Impulse response
 		512 points (FFT window [-Tu/6 ; Tu/6])
Input Signal Strength Accuracy
  • ≥ -50 dBm
  • < -50 dBm

  • +/- 3 dB
  • +/- 2 dB
 ASI characteristics 
ASI Input impedance 75 Ω
Standard Compatibility
 		ETSI EN300 744
ASI Physical Layer
 		EN50083-9
ASI Bit Rate  0 to 60 Mbps
* Depending on hardware version.

COMPARISON TABLE

  RF Version ASI Version RF & ASI Version
Standard Input RF input (1)
ASI input (1)
RF (1) and ASI (1) inputs
Standard Output
ASI output (1)
ASI output (1)
ASI output (1)
Optional Input(s)
2nd RF input
2nd ASI input
2nd RF and/or ASI input
RF input monitoring
Continuous and/or sequential (20 freq.)
-
Continuous and/or sequential (20 freq.)
ASI input monitoring
-
Continuous
Continuous
RF & ASI inputs combined
-
-
Sequential (20 freq.)
Standard packages
Full RF module
Scripteasy V2.0
Full MPEG-T module
Scripteasy V2.0
Basic RF module
Basic MPEG-T module
Scripteasy V2.0
Optional packages
-
MPEG-H module
Full RF module
Full MPEG-T module
MPEG-H module
I/O functions
5 slots for I/O boards
5 slots for I/O boards
5 slots for I/O boards

Technical specifications are subject to change without prior notice GOLDENEAGLE DVB-T/H – 03/2011