GOLDENEAGLE FM

 

 

 

Audemat goldeneagle FM front panel
front panel

Audemat goldeneagle FM rear panel
Rear panel

RF characteristics
Frequency range 87.50 to 108.00 MHz
Frequency step
 		10 kHz
RF input impedance
 		50 Ω / 75 Ω
RF input connector
 		SMA type
RF receiver 3
  FM Receiver
Stereo sensitivity (19 KHz pilot) 40 dBµV for S/N 60 dB
Input sensitivity
5 to 95 dBµV
Selectivity:
Selectivity at ± 120 kHz
> -50 dB
Selectivity at ± 200 kHz
> -55 dB
Selectivity at ± 300 kHz
> -75 dB
Selectivity at ± 400 kHz
> -80 dB
AM rejection at 30% AM / 22.5 kHz dev. 50 dB
 Stereo decoder: 
L/R separation 40 dB Typical
De-emphasis
adjustable 50-75 µsec
19 kHz suppression > 30 dB
Distortion: 
Deviation: 75 kHz Left or Right
< 0.4 % 1 kHz
S/N 1 kHz mono (at 75 kHz deviation and 60 dBµV RF):
RMS 50 dB
QP CCIR 50 dB stereo
 Acquisitions 
Max. number of monitored stations  40
RF level acquisition range
 		20 dBµV to 95 dBµV
RF acquisition relative precision (1)
~ 2 dB guaranteed (~ 0.5 dB typical)
AUDIO signal acquisition range
 		- 40 dB to + 3dB
AF (2) acquisition precision
 		~ 1 dB
MPX signal acquisition range
 		4 kHz to 110 kHz
MPX (2) acquisition precision
 		~ 2 kHz up to 90 kHz
~ 5 kHz from 90 to 110 kHz
PILOT 19 kHz sub-carrier acquisition range 1 kHz to 15 kHz
PILOT 19 kHz (2) acquisition precision ~ 1.5 kHz
RDS 57 kHz sub-carrier acquisition range 1 kHz to 10 kHz
RDS 57 kHz (2) acquisition precision ~ 1 kHz
Communications
TCP-IP protocol with services SNMP / FTP / NTP / XML-RPC
Front panel terminal (default)
 		IP configuration via DCE 9-pin male SUBD
Link type
MODEM (RTC/GSM) / ETHERNET / RS232c
MODEM
Optional, software configuration, approved by Audemat
Modem link type
 		RS232c/USB (converter USB/SERIAL)
Communication speed
 		1 200 - 115 200 bauds
Back panel connectors
DTE 9-pin male SUBD / Type A USB
Ethernet Connector 2 RJ45 10 ports /100M Base-T
 Main characteristics 
Main power supply 110 / 60 Hz or 230 V / 50 Hz
Power consumption
 		~ 38 VA
External dimensions (L x H x D)
 		483 (19’’) x 88.5 (2U) x 340 mm
Weight  Around 6 Kg (13 ½ lbs.)
Unit temperatures: 
Optimal performance temperatures +5°C - +45°C
Guaranteed working temperatures
 		0°C - +55°C
Storage
 		-20°C - +70°C
Humidity < 70%
(1): Depending on equipment calibration and surrounding temperature.
(2): In relation to internal reference level.